0

Your Cart is Empty

MEN
  • WOMEN
  • KIDS
  • SURF
  • SURF REPORT

  • Pyzel Ghost

    Length: 6'0"
    Width: 19 3/8"
    Thickness: 2 9/16"
    Volume: 29.90L
    Fin Setup: 5-Fin Futures
    Tech: Poly
    Tail Shape: Pin

    Pyzel Ghost 6'0 Surfboard - Futures

    Size

    898268

    The Pyzel Ghost Surfboard is a possibly the first truly High Performance board that works great for all levels of surfer and could be considered a one-board quiver for any surf trip with decent to good waves on the menu.

    The design that JJF rode to his (second) 2017 World Title! The Ghost is a possibly the first truly High Performance board that works great for all levels of surfer and could be considered a one-board quiver for any surf trip with decent to good waves on the menu. A super versatile board, it has become one of JJF's favorites for all kinds of surf (Margaret River winner, Bells Ollie Oop, J-Bay carves, and even head-high Trestles) and a go-to for many surfers around the world. Originally designed for performance in hollower, more powerful types of waves, the Ghost has proven to be great for reef breaks, dumpy beachies, and also excels in point waves. Based off of our Short Cut, The Ghost outline is more refined: it still has the wide point pushed a bit forward of center, but the nose area is kept down and the tail slightly pulled in to help it fit into a tighter curve. The thickness is also pushed forward, which helps even more with getting you into waves easily, and we kept the tail and rails thinned out to help hold through barrels and turns at speed. The rocker is med/low through the front half to get you into waves easily and pick up speed quickly. The rear end has plenty of rocker curve for turning control and a snappy responsiveness. Single concave runs through the entire bottom, with a double concave set inside, which equals speed and lift both on a rail and over flat spots while allowing for quick rail-to-rail transitions. The Ghost's combination of rocker and concave makes for high performance handling through a healthy mix of sensitivity and control. Depending on what you want to ride it in we recommend you order your Ghosts anywhere from your height to 8" over, a 1/4" to 1/2" wider, and 1/8" to 3/8" thicker than your everyday shorty. Stock boards all have 5-fin set up. Comes with a round tail, but we can custom make it with any tail you like.

    The cost of shipping a surfboard depends on the size of the surfboard as well as the destination. Check out our Surfboard Shipping Table below.

    Can I return a Surfboard?

    • The board must have NEVER have been ridden, used, waxed or damaged in any way.
    • Customer is responsible for ALL shipping/custom charges to return/exchange.
    • $50 restocking fee will be charged for all returned surfboards.
    • The board must be returned/exchanged within 10 business days of purchase.
    • We strongly recommend insuring all returned or exchanged orders.
    • We are NOT responsible for any returned board that are damaged/lost in transit.
    • Any damage sustained upon return will be deducted from the refund amount. 

    Does the Surfboard come with fins?

    • Typically not, unless stated in the Product Description that fins are included.

    What is the right Surfboard for me?

    • It depends on things like height, weight and experience level. Check out our Surfboard Volume Calculator to find the right size board for you.

    Can I Custom Order a Surfboard?

    • Yes, we do have direct lines with a lot of the board manufacturers and can submit a custom order. Please fill out our Custom Surfboard Order Form if interested.

    Size Guide

    Size Width Thickness Volume
    5'8 18 3/4 2 5/16 24.70
    5'9 18 7/8 2 3/8 26.00
    5'10 19 2 7/16 27.20
    5'11 19 1/8 2 1/2 28.40
    6'0 19 3/8 2 9/16 29.90
    6'1 19 1/2 2 5/8 31.30
    6'2 19 3/4 2 11/16 32.80
    6'3 19 7/8 2 3/4 34.30
    6'4 20 2 7/8 36.60
    6'5 20 3/8 3 39.40
    6'6 20 1/2 3 40.10
    6'8 20 3/4 3 1/16 42.50
    6'10 20 7/8 3 1/8 44.90
    7'0 21 3 3/16 47.10

    Video

    About Pyzel Surfboards

    Pyzel Surfboards began in a backyard shaping room on the North Shore around 1995 or so, and has evolved to become one of the leading surfboard companies in the world today. Jon Pyzel grew up in Santa Barbara, California, started surfing in junior high and quickly found himself deep into it. Matt Moore started shaping his boards and put him on his team. Matt always helped explain the ideas and principles of surfboard design and let Jon watch him shape all his boards. After traveling for surf, Jon realized he wanted better waves, warmer water, making a permanent move to Oahu's North Shore in 1992. There he found work fixing dings at Country Surfboards, and Jon quickly learned the ins and outs of the craft, working as a hot coater and laminator. He soon connected with master shaper Jeff Bushman, who gave him guidance, input, and encouragement. Eventually, Jeff gave Jon a job as his back-shaper and that was the beginning of his shaping career. A defining moment came a few years later, in 1998. Alex Florence approached Jon about making a board for her oldest son John John, who was 5 at the time. From there forward, Jon and John John worked together to redefine what was possible for Grom surfng. Fast forward almost 20 years and John John Florence is the 2016 World Champ, widely considered the best surfer alive, all while riding Pyzel surfboards. When we think about our company today, we consider JJF as one of the cornerstones to our success, not just for his amazing surfng ability and priceless feedback, but also for his loyalty, his humble attitude, his gratitude, and his positive outlook on life. We didin't start this all to become a giant company, putting out as many "units" as we could, we started it because we love surfing and everything that goes with that - travel to new lands, great friendships, adventure. But most of all we started this because we love surfboards! Today Pyzel Surfboards has grown to be an international business, but is still run by the family. Jon and his wife Dali live on the beach in Hawaii with their 2 daughters, and help run the Pyzel Surfboards factories on the North Shore and in Oceanside, CA. We take great pride in every board we build, and have do our very best to make sure that our customers are getting exactly the right board for what they want to do. We have trusted licensees building our boards on every continent, and Jon shapes in Australia, Europe, Brazil, Japan, Indonesia, South America and California. Over the years, Pyzel boards have been ridden by many of the world's best surfers, including: