0

Your Cart is Empty

MEN
  • WOMEN
  • KIDS
  • SURF
  • SURF REPORT

  • Pyzel Red Tiger

    Length: 5'9"
    Width: 19 1/8"
    Thickness: 2 5/16"
    Volume: 27.50L
    Fin Setup: Tri-Fin FCS II
    Tech: Poly
    Tail Shape: Squash

    Pyzel Red Tiger 5'9 Surfboard - FCS II

    Size

    781579

     Silky smooth, even in junk waves, and possibly our fastest board yet, The Red Tiger is John John Florence's new High Performance Shortboard unlike anything Pyzel have released in the past. It is the ultimate performance machine for small/medium sized, slower, weaker waves based on John's simple guidance - make it Fast and Fun.  

    The idea for this board was hatched when John began riding some different - fun boards -during some breaks from competing. By far his favorite in the last year has been our new flat rockered, Funformance board, the White Tiger (5'6"), and he asked Pyzel to turn that design into something he could take back on tour to ride when the surf was less than pumping or on the weaker side. The outline is a touch on the plump side for a HPSB, but the wide point sits a more traditional inch behind center, keeping the emphasis to surfing it off the mid to back half of the board. The wider tail-block squash helps to keep area in the tail which provides lift and drive, and also helps create pop when going to the air. A moderate hip by the front fins puts a break in the outline to help create a pivot point that allows for tighter radius turns and release in the lip. The rocker and bottom contour is really what sets this board from other boards in this category. Its our flattest HPSB so far and that rocker translates to easy, consistent speed from the moment you stand up, through flat sections and even in super weak, small waves. But, flat rocker can feel sticky and tends to make you surf flat, so we run single to double concave (JJF's favorite bottom contour) through the front 2/3 of the board and then blend that into a significant double concave/deep vee combo through the fins and off the tail. This bottom keeps the flatter board easy to roll rail-to-rail and the vee of the tail works to allow easy vertical surfing and short-arc carves, even in tight, pockety waves. The thickness flow (foil) from nose to tail is balanced and clean, with the front of the board just barely thinner than the back half. The deck is flat-ish, keeping more foam (volume) out towards the rails. The actual rails are full just in from the outline (under the ball of your hand if you are holding the board under your arm), but are tapered to keep sensitivity and bite. Ride your Red Tiger around an inch shorter than normal HPSB, and a bit wider. Volume should be close, but go up a ½ to1 liter for added zing in weaker waves. The board will easily turn your everyday sessions into something special and we believe it will outperform any other HPSB in underpar waves AND still come through when the surf turns on!

    The cost of shipping a surfboard depends on the size of the surfboard as well as the destination. Check out our Surfboard Shipping Table below.

    Can I return a Surfboard?

    • The board must have NEVER have been ridden, used, waxed or damaged in any way.
    • Customer is responsible for ALL shipping/custom charges to return/exchange.
    • $50 restocking fee will be charged for all returned surfboards.
    • The board must be returned/exchanged within 10 business days of purchase.
    • We strongly recommend insuring all returned or exchanged orders.
    • We are NOT responsible for any returned board that are damaged/lost in transit.
    • Any damage sustained upon return will be deducted from the refund amount. 

    Does the Surfboard come with fins?

    • Typically not, unless stated in the Product Description that fins are included.

    What is the right Surfboard for me?

    • It depends on things like height, weight and experience level. Check out our Surfboard Volume Calculator to find the right size board for you.

    Can I Custom Order a Surfboard?

    • Yes, we do have direct lines with a lot of the board manufacturers and can submit a custom order. Please fill out our Custom Surfboard Order Form if interested.

    Size Guide

    Size Width Thickness Volume
    5'4 18 3/8 2 1/16 22.20
    5'5 18 1/2 2 1/8 23.30
    5'6 18 5/8 2 1/8 23.90
    5'7 18 7/8 2 3/16 25.10
    5'8 19 2 1/4 26.30
    5'9 19 1/8 2 5/16 27.50
    5'10 19 1/4 2 3/8 28.70
    5'11 19 3/8 2 7/16 30
    6'0 19 1/2 2 1/2 31.30
    6'1 19 5/8 2 9/16 32.70
    6'2 19 3/4 2 5/8 34.20
    6'3 19 7/8 2 3/4 36.20
    6'4 20 2 3/4 36.90

    Video



    About Pyzel Surfboards

    Pyzel Surfboards began in a backyard shaping room on the North Shore around 1995 or so, and has evolved to become one of the leading surfboard companies in the world today. Jon Pyzel grew up in Santa Barbara, California, started surfing in junior high and quickly found himself deep into it. Matt Moore started shaping his boards and put him on his team. Matt always helped explain the ideas and principles of surfboard design and let Jon watch him shape all his boards. After traveling for surf, Jon realized he wanted better waves, warmer water, making a permanent move to Oahu's North Shore in 1992. There he found work fixing dings at Country Surfboards, and Jon quickly learned the ins and outs of the craft, working as a hot coater and laminator. He soon connected with master shaper Jeff Bushman, who gave him guidance, input, and encouragement. Eventually, Jeff gave Jon a job as his back-shaper and that was the beginning of his shaping career. A defining moment came a few years later, in 1998. Alex Florence approached Jon about making a board for her oldest son John John, who was 5 at the time. From there forward, Jon and John John worked together to redefine what was possible for Grom surfng. Fast forward almost 20 years and John John Florence is the 2016 World Champ, widely considered the best surfer alive, all while riding Pyzel surfboards. When we think about our company today, we consider JJF as one of the cornerstones to our success, not just for his amazing surfng ability and priceless feedback, but also for his loyalty, his humble attitude, his gratitude, and his positive outlook on life. We didin't start this all to become a giant company, putting out as many "units" as we could, we started it because we love surfing and everything that goes with that - travel to new lands, great friendships, adventure. But most of all we started this because we love surfboards! Today Pyzel Surfboards has grown to be an international business, but is still run by the family. Jon and his wife Dali live on the beach in Hawaii with their 2 daughters, and help run the Pyzel Surfboards factories on the North Shore and in Oceanside, CA. We take great pride in every board we build, and have do our very best to make sure that our customers are getting exactly the right board for what they want to do. We have trusted licensees building our boards on every continent, and Jon shapes in Australia, Europe, Brazil, Japan, Indonesia, South America and California. Over the years, Pyzel boards have been ridden by many of the world's best surfers, including: